12v Battery Desulfators Life Span Optimization

Optimize your battery life span for up to 3 times!

Price: $54.12

Sulfation, or lead acid crystal buildup on your battery plates is by far the most common cause of battery failure, accounting for 84% of batteries according to the Battery Council International. We therefore junk our batteries long before the end of their designed lifespan.

The Infinitum Desulfator Battery Life Optimizer prevents sulfation on your battery and reverses the existing lead sulfate crystals on the plates, ensuring a battery with maximum lifespan and optimum performance. This desulfation process can double or tripple your battery life span.

Testimonials 
"One thing I really like about your unit over some of the others which are made here in the USA is the voltage-sensitive shutoff feature you've included in the circuit design."
~ Joel Grant, Auto enthusiast, Carmel, Indiana, USA.

"I recovered my Duralast battery even though I had left it uncharged for 18 months and more than doubled the Cold Cranking Amps!"
~ Ted, Athol, Massachusetts, USA.

"I am stoked, it has not only saved me A$4500 (USD4405) on a (fork lift) battery pack but it costs much less to recharge as well so I save on my power bill!"
~ Tony Castleman, Qualified mechanic of 25 years, North Shore, Victoria, Australia

"Thanks to your Desulfator, a junked battery I bought had an additional 16 months life span!"
~ Anthony Charles, Director, SQT Technologies (M) Pte Ltd.

“One reason your battery desulfphators appeal to me is the sealed epoxy encapsulation, protecting it from the wet and salty air of the marine environment.”
~ Ken Lessin, Marine electrician, Caribbean.

"These Battery Desulfators have been successful in the revival of the shelf sulfated automotive batteries that resisted normal charging and were destined to be scrapped for recycling"
~ Siew Chee Pong, Director, Makenta Engineering Pte Ltd.

Why buy from us?

• Most robust desulfator in the market.
• Unique shut-off and polarity protection feature.
• Revives all acid/gel batteries up to 3 times.
• Works regardless of Ah level.
• EMC & safety certified.
• 1-year warranty.
• Better than desulfator additives (EDTA).  
• Reusable, outlasting your batteries.
• Shipped within 1 business day.

Why you need desulfators & how you will benefit

84% batteries fail prematurely
This is due to lead sulfate crystal buildup on the plates. This means that most people throw away batteries before they have to!

Batteries lose life span even before use!
New batteries suffer from lead sulfate crystallization before you even buy them.

Save the earth
Reducing the rate of battery disposal means less disposal of hazardous lead and sulfuric acid.

Lowers battery operating temperature
The degree of battery discharge increases with temperature whether in use or storage. With a lower operating temperature, less evaporation occurs.

Revives 'dead' or junked batteries
Revives most dead batteries when used in parallel with a charger.

Why buy from us?

Infinitum Desulfators are possibly the best in the market today. The chart below shows you a comparison with some of the leading battery desulphator brands.

Can revive and recondition "dead" batteries

Many of the features below are unique and unrivaled by other brands

Water/fire resistant rock-solid encapsulation
Your desulfator will be encapsulated in a robust epoxy resin-filled aluminum casing, protecting it from the elements of humidity, heat or vibrations in engine chamber.

Lowers internal battery operating temperature
The degree of battery discharge increases with temperature whether in use or storage. With a lower operating temperature, less evaporation and discharge will occur.

No short circuits, no fuse, no fuss
Your desulphator will come with total polarity protection built in. You will have no short circuits in the unlikely event that the cables are incorrectly installed.

Areas of application

• Automotive batteries
• Motorbike batteries
• Marine, jetski batteries
• Truck, RV, caravan, motor home batteries
• Electric golf carts
• Electric cars, scooters and mopeds
• Electric bicycles
• Electric wheelchairs

• Earthship / off-grid battery banks
• UPS battery banks
• DC systems of electrical substations
• Telecommunication hubs
• Wind farm storage systems
• Solar farm storage systems
• Back-up system battery banks
• DC starting systems of generators

Installation
The unit can be installed either on the battery itself, the battery holder, or the chassis of the vehicle. It is strongly recommended that the surface area of the installation location is clean.
Choose either one of these methods to install

.

Basic battery status display

Green LED - Battery voltage is above 12.5V. The Green LED must be on when the engine is running.

Red LED - Battery voltage is below 12V. You should never see this when the engine is running!

If your engine is running and no LEDs are illuminated, either the unit has failed (which is unlikely) or your alternator has failed!

When you crank the car, you may notice the Red LED illuminated for a short while, then the Green LED lights up. This is normal. During cranking, current is drawn out of the battery, causing a drop in voltage. At this moment, the Red LED indicates the voltage drop. After the alternator kicks in, the Green LED will illuminate, confirming that the voltage is above 12.5V.

How does it work?

As automobiles are usually parked longer than they're being driven, the batteries are left discharging for longer periods of time than when they are being charged.

Charging:
2PbSO4 + 2H20 -> Pb + PbO2 + 2H2SO4

Discharging:
Pb + PbO2 + 2H2SO4 -> 2PbSO4 + 2H20

This causes water and lead sulfate (PbSO4) to form at a faster rate than it can be reconverted back to lead, lead dioxide and water. Lead sulfate that's left sitting, originally spongy, will eventually crystallize. Once in crystal form, the lead sulfated cannot be reconverted, even when the battery is being charged. This causes a reduction in active material (the lead and lead dioxide) and surface area where chemical reaction takes place. Eventually, the battery will no longer have the capability to supply enough cranking current to start a car. This process, also known as sulfation, is the main cause why batteries fail prematurely!

The Desulfator generates Amplitude Modulated Pulses (AMP) at the resonance frequency of the crystals to shatter the covalent bonds that hold it together. This allows the lead sulfate to be reconverted once the battery is charged. A battery free from lead sulfate crystals will have its lifespan stretched to its maximum! No more premature failure due to sulfation!

Specifications

Payment

  PayPal Verified
We understand our customers want their online transactions to be simple and secure. To increase security, we have a verified PayPal account, so you can feel secure when using their system.

.

PayPal Accepted Currencies
If you wish to pay in your local funds or major currencies, write to us after you win this bid or have made a purchase with us. We will then invoice you according to your preferred currency.

Find our more
For more information about our product and articles on how you can optimize the life span of your battery.

Free articles
Battery maintenance & care
How batteries sulfate
Reviving dead batteries
Why not desulphator additives

A desulphator will not help batteries with pitted or warped plates, or that have been overcharged to the point where plate damage has occured. They also will generally not do much for auto starting batteries, since those seldom sit around for days or weeks only partially charged - which is by far the main cause of sulphation.

There is no guarantee that this will help your battery. Our own tests have shown that it seems to help sulfated batteries in otherwise good condition, but it is often hard to tell what a battery's internal problems are.