wind

 

Wind Kit

 

EcoWind2000 24v Wind turbine Kit

 

120 mph survival

This is our most powerful unit yet to come out, and heavy duty construction

1 full year warranty.

Charge controller is built by us to last and is included in this purchase

100' of wire is included in this purchase as well.

It's direct burial with a welding wire insulation.

All metal design no wimpy plastic blades to worry about chipping or breaking.

Slip ring is built ot last with no brushes.  This is also included.

Unit can be grid tied easily.

 20 year life expectancy.

 

• Blade start up speed is only 3.2MPH - Power up speed is 6 MPH -
• Power curve displayed proudly
• 24 volt operation Also available in 48, 12 volt on request.
• 3 phase ac transport to controller for low power loss
• stainless slip ring no more twisted wires
• ROHS compliant
• 1 year factory warranty
• t6 high speed aluminum blades
• stainless bolts
• stainless hub
• sealed water tight alternator case no more corrosion. (built to last a lifetime)
• no electronics on turbine
• controller is electromechanical no sensitive electronics
• ring terminals and lugs included on controller
• great customer support for technical questions.
• Very thick all welded chassis
• Cast Iron Pivot bearing for easy turning into the wind
• fits on 1.5" pipe and simple carbide set screws secure turbine
• 5 -28" long blades 64" rotor
• 120mph survival
• Color wiring diagram and written instructions included.
• One Year warranty no questions asked 30 day money back guarantee. 
• PMA has no brushes, very dependable!
• True PMA we use specially designed n42 Industrial magnets with over 400lbs of pull force far exceeding any competition currently out there in a delco case.
  Copyright and patent pending protection allows us to sell our design now.
• The first week we opened we had over 50 calls for this turbine design!
• Comes with 5 T6 6061 Aluminum HyperBlades.
• No slip rings to fail or replace. Wire tension system.
• Hyperspin blades are by far the best blades in the business.
• Fits on 1.5" schedule #40 or #80 pipe. This utilizes the first industrial 10 hardened Stainless Steel ball bearing mount with locking collar.  This allows the turbine to turn into the wind at only 2mph of wind.  More than 10 percent of power is lossed due to the turbine not turning all the way into the wind.
  125,000 hours+ of rated bearing life. New bearings cost only $5.00
• Stainless 5 blade hub double thick compared to the competition (1/4" hardened stainless hub)
• All welded chassis with 12" square tail fin
• 3/16" plate chassis extra thick for commercial installs
• 1/2" square iron tail stem all welded no bolting for installations of 20 years or more.
• New alternator design with new blades allow for a perfectly silent turbine
• We manufacture the turbine, the wire, and the charge controllers from the ground up so there is nothing but quality in every custom built turbine.
• Stainless Bolts and locking nuts built to last a lifetime!
• Rhino bedliner coating on Alternator and Chassis recommended option.
• Makes 64" diameter turbine.
• Weighs 48 lbs.
• Ships USPS or UPS your choosing.