|
120 mph survival
This is our most
powerful unit yet to come out, and heavy duty construction
1 full year warranty.
Charge controller is
built by us to last and is included in this purchase
100' of wire is
included in this purchase as well.
It's direct burial
with a welding wire insulation.
All metal design
no wimpy plastic blades to worry about chipping or breaking.
Slip ring is built ot
last with no brushes. This is also included.
Unit can be grid tied
easily.
20 year life
expectancy.
-
Blade start
up speed is only 3.2MPH - Power up speed is 6 MPH -
- Power curve
displayed proudly
- 48 volt operation
Also available in 24, 12 volt on request.
- 3 phase ac
transport to controller for low power loss
- stainless slip
ring no more twisted wires
- ROHS compliant
- 1 year factory
warranty
- t6 high speed
aluminum blades
- stainless bolts
- stainless hub
- sealed water
tight alternator case no more corrosion. (built to last
a lifetime)
- no electronics on
turbine
- controller is
electromechanical no sensitive electronics
- ring terminals
and lugs included on controller
- great customer
support for technical questions.
- Very thick all
welded chassis
- Cast Iron Pivot
bearing for easy turning into the wind
- fits on 1.5" pipe
and simple carbide set screws secure turbine
- 5 -28" long
blades 64" rotor
- 120mph survival
- Color wiring
diagram and written instructions included.
-
One Year warranty no questions asked
30 day money back guarantee.
-
PMA has no brushes, very dependable!
-
True PMA we use specially designed
n42 Industrial magnets with over 400lbs of pull force
far exceeding any competition currently out there in a
delco case.
Copyright and patent pending protection allows us to
sell our design now.
-
The first week we opened we had over
50 calls for this turbine design!
-
Comes with 5 T6 6061 Aluminum
HyperBlades.
-
No slip rings to fail or replace.
Wire tension system.
-
Hyperspin blades are by far the best
blades in the business.
-
Fits on 1.5" schedule #40 or #80
pipe. This utilizes the first industrial 10 hardened
Stainless Steel ball bearing mount with locking collar.
This allows the turbine to turn into the wind at only
2mph of wind. More than 10 percent of power is lossed
due to the turbine not turning all the way into the
wind.
125,000 hours+ of rated bearing life. New bearings cost
only $5.00
-
Stainless 5 blade hub double thick
compared to the competition (1/4" hardened stainless
hub)
-
All welded chassis with 12" square
tail fin
-
3/16" plate chassis extra thick for
commercial installs
-
1/2" square iron tail stem all welded
no bolting for installations of 20 years or more.
-
New alternator design with new blades
allow for a perfectly silent turbine
-
We manufacture the turbine, the wire,
and the charge controllers from the ground up so there
is nothing but quality in every custom built turbine.
-
Stainless Bolts and locking nuts
built to last a lifetime!
-
Rhino bedliner coating on Alternator
and Chassis recommended option.
-
Makes 64" diameter turbine.
-
Weighs 48 lbs.
-
Ships USPS or UPS your choosing.
Shipping dimensions 11"x11"x48" and weight = 66lbs including
100' wire
Can
ship internationally for between $225 and $500 depending on
the country Please contact us for international shipping
prices. Or, you can get your own quote at
www.usps.com using the
shipping dimensions above.
|
